Automotive Picture Gallery

Listed below are our standard patterns that we keep in stock.  Please visit our store to purchase.

pic1DGL-50 is our smallest engine turning available. Mandrel size used to create swirled pattern is 1/2″ the circles are run in staggered rows every 1/4″. This pattern is usually used to create dash inserts. Standard sheet sizes start at 6″x 12″ the largest sheet size available is 48″x 96″. Custom cut sizes are also available. Material is stocked in .030 stainless steel or .030 and .063 aluminum. Other thickness are available in full sheets call for information. pic2DGL-75 is our next size up. Mandrel size used to create swirled pattern is 3/4″ the circles are run in staggered rows every 3/8″. This pattern is usually used to create large dash inserts or cover a complete dashboard. Standard sheet sizes start at 6″x 18″ the largest sheet size available is 48″x 96″. Custom cut sizes are also available. Material is stocked in .030″ stainless steel or .030 and .063″ aluminum. Other thicknesses are available in full sheets call for information. pic3DGL-100 Mandrel size used to create swirled pattern is 1″ the circles are run in staggered rows every 1/2″. This pattern is usually used to create a complete dash boards, firewalls or interior door panels. Standard sheet sizes start at 12″x 24″ the largest sheet size available is 48″x 96″. Custom cut sizes are also available. Material is stocked in .030 stainless steel or .063 aluminum. Other thickness are availabe in full sheets call for information.
pic4DGL-150 Mandrel size used to create swirled pattern is 1 1/2″ the circles are run in staggered rows every 3/4″. This pattern is usually used to create firewalls or under the hood panels. Standard sheet sizes start at 24″x 24″ the largest sheet size available is 48″x 96″. Custom cut sizes are also available. Material is stocked in .030 stainless steel and .063 aluminim. Other thicknesses are available in full sheets call for information. pic5DGL-200 Mandrel size used to create swirled pattern is 2″ the circles are run in staggered rows every 1″. This pattern is usually used to create firewalls, under the hood inserts or pickup box floor. Standard sheet sizes start at 24″x 24″ the largest sheet size available is 48″x 96″. Custom cut sizes are also available. Material is stocked in .030 stainless steel or .063 aluminum. Other thicknesses are avialable in full sheets call for information. 5AA-5 is an Auburn style gauge panel. Pattern uses DGL-50 on .063″ aluminum. Center speedometer hole 3 3/8″ with four holes 2 1/16″ for additional gauges. Size approximately 4 5/8″ tall and 17 1/2″ long. Price $99
F-2F-2 is a five-gauge style insert patterned off of a 1932 Ford. Pattern uses DGL-50 on .063″ aluminum. Center speedometer hole 3 3/8″ with four holes 2 1/16″ for additional gauges. Size approximately 5 1/4″ tall and 14 1/2″ long. Price $99 F-4F-4 is a five-gauge style insert patterned off of a 1934 Ford. Pattern uses DGL-50 on .063″ aluminum. Center speedometer hole 3 3/8″ with four holes 2 1/16″ for additional gauges. Size is approximately 5 7/8″ tall and 11 7/8″ long. Price $99 C-5C-5 dash is a universal hot rod dash. Pattern uses DGL-50 on .063″ aluminum. Center speedometer hole 3 3/8″ with four holes 2 1/16″ for additional gauges. Size approximately 5 1/4″ tall and 15 1/2″ long. Price $89
C-6C-6 dash is a universal hot rod dash. Pattern uses DGL-50 on .063″ aluminum. Center speedometer hole 3 3/8″ and tachometer hole 3 3/8″ with four holes 2 1/16″ for additional gauges. Size approximately 5 1/4″ tall and 21″ long. Price $99 L-5L-5 dash is a universal hot rod dash. Pattern uses DGL-50 on .063″ aluminum. Left side speedometer hole 3 3/8″ with four holes 2 1/16″ for additional gauges. Size approximately 5 1/4″ tall and 15 1/2″ long. Price $89 L-6L-6 dash is a universal hot rod dash. Pattern uses DGL-50 on .063″ aluminum. Left side speedometer hole 3 3/8″ and 3 3/8″ tachometer hole with four holes 2 1/16″ for additional gauges. Size approximately 5 1/4″ tall and 21″ long. Price $99
SW5BStewart Warner style dash Pattern uses DGL-50 on .063″ aluminum. Center speedometer hole 3 3/8″ with four holes 2 1/16″ for additional gauges. Size approximately 4 5/8″ tall and 15 1/8″ long. Price $99 IMG_1361

3 Hole Undermount Gauge Panel

Made from .063″ thick Aluminum with 1/2″ spun circle pattern

2 holes 2-1/16″ diameter

Overall size: 3″ tall x 8″ wide

Price:  $35.95

IMG_1359

2 Hole Undermount Gauge Panel

Made from .063″ thick Aluminum with 1/2″ spun circle pattern

2 holes 2-1/16″ diameter

Overall size: 3″ tall x 5-1/2″ wide

Price:  $27.95

Continue to go through our picture gallery to view FPM Metals applications.