Part Scanning Service for Custom Fabricated Panels
FPM Metals has the capability to reverse engineer your 2D/flat parts. With our 2D scanner we can scan your original part for an exact copy or send us a template made of poster board for your own custom panel. For FPM Metals to quote a custom made engine turned piece please follow these instructions. You must provide us with an exact pattern of the original if possible or pattern cut from a piece of poster board available at any art supply house. Cut the outside perimeter as close as possible to what you need then mark center of all holes to be cut and the required diameter cut out for each gauge, but do not cut out the holes. List the swirl pattern size i.e. DGL-50 DGL-100 etc. you want along with material type and thickness desired. Include return address and phone number. Send pattern to:
224 sixth street
PO box 16
Fairbury, Nebraska 68352
You may also e-mail a cad drawing that is a .dxf file format to firstname.lastname@example.org. After reviewing your pattern we will give you an exact quotation as to the cost to reproduce.
Click here to download details on our Custom Fabrication Services that we offer.