Architectural Pattern Gallery

FPM Metals has brought the tedious task of engine turning into the 21st Century.

pattern01

#8 Mirror Finish Stainless SteelAvailable in 4’x10′ sheets.Comes in either .030″ or .063″ thick.

pattern02

#8 Mirror Finish Stainless Steel Available in 4’x10′ sheets.Comes in either .030″ or .063″ thick.

pattern03

HOHR Non-directional scratch pattern with finely ground lines running arbitrarily throughout the sheet. May be used for signage or restaurants wall claddings. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern04

Pattern: DGL-100 Mandrel size used to create swirled pattern is 1″ the circles are run in staggered rows every 1/2″. Over 9000 individually polished circle combine to cover a sheet. This pattern can be used for music industry or office accent. Normally less than full sheets are applied as trim. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern05

Pattern: DGL-150 Mandrel size used to create swirled pattern is 1 1/2″ the circles are run in staggered rows every 3/4″. Over 4,000 individually polished circle combine to cover a sheet. This pattern can be used for interior foyer or office furniture. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern06

Pattern: DGL-200 Mandrel size used to create swirled pattern is 2″ the circles are run in staggered rows every 1″. Over 2,300 individually polished circle combine to cover a sheet. This pattern can be used for nightclubs or column covers. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern07

Pattern: DGL-300 Mandrel size used to create swirled pattern is 3″ the circles are run in staggered rows every 1 1/2″. Over 1,000 individually polished circle combine to cover a sheet. This pattern can be used for lighting displays or airport wall claddings. Normally multiple large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern08

Pattern: P108 – Repeating pattern utilizing coarsely polished 3 1/2″ waves and rings. Pattern runs left to right (48” way) across the sheet. May be used for professional reception areas or offices. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern09

Pattern: P331 – Arches/drapes pattern utilizing 3/4″ polished stripes. Stripes run the short way (48” direction) of the sheet. Pattern appears to move as light reflects off of it. May be used as room dividers or wall accents. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern10

Pattern: P110 – Clouds pattern is a soft non-directional polished pattern. May be used for signage or restaurants wall claddings. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern11

Pattern: LZ-300 Linear pattern utilizing coarsely polished 3″ stripes. Stripes run the long way of the sheet and cover complete sheet. May be used in food courts or interior of high traffic areas. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern12

Pattern: ND-50R Non-directional orbital scratch pattern with finely ground lines looping arbitrarily throughout the sheet. May be used as alternative to #4 good for restaurant fixtures and wall guards. Normally any size sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available./p>

pattern13

Pattern: OV-150 Mandrel size used to create swirled pattern is 1 1/2″ the circles overlay on top of each other in rows every 3/4″. Pattern appears to change in appearance as one walks by. This pattern is non directional and can be used for cruise ships or office furnishings. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern14

Pattern: OV-200 Mandrel size used to create swirled pattern is 2″ the circles overlay on top of each other in rows every 1″. Pattern appears to change in appearance as one walks by. This pattern is non directional and can be used for hotel lobby or theater stage accent. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern15

Pattern: OV-300 Mandrel size used to create swirled pattern is 3″ the circles overlay on top of each other in rows every 1 1/2″. Pattern appears to change in appearance as one walks by. This pattern is non directional and can be used for wall cladding for music industry or column covers. Normally multiple large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern16

Pattern: P101 – Repeating swag style pattern utilizing coarsely polished 3 1/2″ loops and rings. Pattern runs left to right across the sheet. May be used for professional reception areas or offices. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern17

Pattern: P107 – Repeating pattern utilizing coarsely polished 3 1/2″ loops and rings. Pattern runs left to right (48” way) across the sheet. May be used for professional reception areas or offices. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern18

Pattern: P112 – Is a non-directional scratch pattern that has a galvanized shimmer look to it that runs throughout the sheet. May be used for signage or restaurants wall claddings. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. “. This pattern is available in aluminum only. Metal thickness is .020, .030″ or .063” other thicknesses are available.

pattern19

Pattern: P124 – Shimmering pattern that doesn’t have near as much repetitive arrangement to it utilizing finely 3” polished overlapping lines. Pattern runs the short way (48” way) across the sheet. May be used for wall cladding. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. This pattern is available in aluminum only. Metal thickness is .020, .030″ or .063″ other thicknesses are available.

pattern20

Pattern: P308 – Sign wave pattern utilizing 3/4″ polished stripes. Stripes run the long way (96” direction) of the sheet. Pattern appears to move as light reflects off of it. May be used as room dividers or wall accents. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern21

Pattern: P311 – Unstraight line pattern utilizing 3/4″ polished stripes. Stripes run the long way (96” direction) of the sheet. Pattern appears to move as light reflects off of it. May be used as room dividers or wall accents. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern22

Pattern: PZZ-300 Linear zigzag pattern utilizing coarsely polished 3″ stripes. Zigzagging stripes run the long way of the sheet and cover complete sheet. Ideal for use in any high traffic areas in theaters or sporting areas. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern23

Pattern: P110-TS ThunderStorm pattern is a soft non-directional polished pattern with a random “lightning strike” . May be used for signage or restaurants wall claddings. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.

pattern24

Pattern: STR-75 Linear pattern utilizing 3/4″ polished stripes. Stripes run the long way of the sheet. Pattern appears to move as light reflects off of it. May be used as room dividers or wall accents. Normally large sections of sheets are applied. Standard sheet size available is 48″x 96″. Material available in stainless steel or aluminum other metals available on request. Metal thickness is .030″ or .063″ other thicknesses are available.